Home > News > TORQUE CONTROL

TORQUE CONTROL (19)

Products (19)

811 R

811 R
Norme:  NF EN ISO 6789 ISO 6789 DIN EN ISO 6789

 

Click torque wrenches without accessories

new!

- Accuracy ±2% of the preset torque value except U08114602 (±4%) and U08114601 (±6%)
- Reliability of mechanism: 50.000 cycles (wrenches up to 200 Nm)
- One-way wrenches usable for unscrewing by reversing the bits
- To be used with 9x12 or 14x18 mm fittings
- Numbered wrenches supplied with ISO 6789 calibration certificate
- Supplied in a plastic box

811 RA

811 RA
Norme:  NF EN ISO 6789 ISO 6789 DIN EN ISO 6789

 

Click torque wrenches with removable ratchet

new!

- Accuracy ±2% of the preset torque value except U08114612 (±4%) and U08114611 (±6%)
- Reliability of mechanism: 50.000 cycles (wrenches up to 200 Nm)
- One-way wrenches usable for unscrewing by reversing the bits
- To be used with 9x12 or 14x18 mm fittings
- Numbered wrenches supplied with ISO 6789 calibration certificate
- Supplied in a plastic box with ratchet and revolving handle (except U08114611 - U08114612)

811 RAL

811 RAL
Norme:  NF EN ISO 6789 ISO 6789 DIN EN ISO 6789

 

Click torque wrenches with dual lbf.in or lbf.ft and Nm graduation

new!

- Model with 72 teeth and an angle of action of 5°
- Accuracy ±2% of the preset torque value
- Reliability of mechanism: 50.000 cycles
- Dual lbf.in or lbf.ft and Nm graduation
- Reversible ratchet
- To be used with 9x12 or 14x18 mm fittings
- Full metal wrenches with knurled handle
- Numbered wrenches supplied with ISO 6789 calibration certificate
- Supplied in a plastic box with ratchet

811 RB

811 RB
Norme:  NF EN ISO 6789 ISO 6789 DIN EN ISO 6789

 

"Non vernier" adjustable click torque wrenches

new!

- Accuracy ±4% of the preset torque value
- Reliability of mechanism: 100.000 cycles
- Torque adjustment with a key on a control bench (see torque controllers range)
- Wrenches supplied with ISO 6789 calibration certificate
- The wrenches can be preset and used for tightening and untightening
- To be used with 9x12 or 14x18 mm fittings
- Metal knurled handle
- Numbered wrenches supplied with a protective plastic tube

811 RC

811 RC
Norme:  NF EN ISO 6789 ISO 6789 DIN EN ISO 6789

 

"Non vernier" wide angle adjustable torque wrenches

new!

- Accuracy ±8% of the preset torque value
- Reliability of mechanism: 50.000 cycles
- Torque adjustment with a key on a control bench (see torque controllers range)
- Numbered wrenches supplied with ISO 6789 calibration certificate
- Supplied with a protective plastic tube

811 RD

Manual reset wrenches

new!

- Accuracy ±6% of the preset torque value
- Wrench U08114732, graduated in Nm with fixed square drive 1/4"
- Wrench U08114733-U08114735, graduated in daNm
- Numbered wrenches supplied with ISO 6789 calibration certificate
- Supplied in a plastic case

811 RE

811 RE
Norme:  NF EN ISO 6789 ISO 6789 DIN EN ISO 6789

 

Manual reset wrenches with removable square drive

new!

- Accuracy ±6% of the preset torque value
- Wrench U08114832, graduated in Nm with fixed square drive
- Wrench U08114833-U08114835, graduated in daNm
- Numbered wrenches supplied with ISO 6789 calibration certificate
- Supplied in a plastic case

811 RF

811 RF
Norme:  NF EN ISO 6789 ISO 6789 DIN EN ISO 6789

 

Manual click wrenches with removable ratchet

new!

- Accuracy ±6% of the preset torque value
- Graduated in daNm
- Supplied in a plastic case with ISO 6789 calibration certificate

812 R

812 R
Norme:  NF EN ISO 6789 ISO 6789 DIN EN ISO 6789

 

High-torque wrenches without accessories

new!

- Accuracy ±4% of the preset torque value
- Two reading scales: Nm and lbf.ft
- Large size dial
- Light alarm when reaching the preset torque value
- Cylindrical attachment diameter 30 mm
- Numbered wrenches supplied with ISO 6789 calibration certificate

812 RA

812 RA
Norme:  NF EN ISO 6789 ISO 6789 DIN EN ISO 6789

 

High-torque wrenches with square drive

new!

- Accuracy ±4% of the preset torque value
- Two reading scales: Nm and lbf.ft
- Large size dial
- Light alarm when reaching the preset torque value
- Cylindrical attachment diameter 30 mm
- Numbered wrenches supplied with ISO 6789 calibration certificate
- Supplied in metal case 760x220x140 mm

812 RB

812 RB
Norme:  NF EN ISO 6789 ISO 6789 DIN EN ISO 6789

 

High-torque wrenches with ratchet and square drive

new!

- Accuracy ±4% of the preset torque value
- Two reading scales: Nm and lbf.ft
- Large size dial
- Light alarm when reaching the preset torque value
- Cylindrical attachment diameter 30 mm
- Numbered wrenches supplied with ISO 6789 calibration certificate
- Supplied in metal case 760x220x140 mm

812 RP

Handle

new!

- Telescopic handle that gives up to 3 m leverage including length of wrench
- To be used with torque wrench U08124603 (500-2.500 Nm)
- Supplied with fasteners

813 A

813 A
Norme:  NF EN ISO 6789 ISO 6789 DIN EN ISO 6789

 

Electronic torque wrenches

new!

- Accuracy ±2% of the preset torque value between 20% and 100% wrench capacity
- Measuring mode: peak or follower
- Measuring unit: Nm, lbf.ft, lbf.in and Kg.cm
- To be used with 9x12 or 14x18 mm fittings
- Numbered wrenches supplied with ISO 6789 calibration certificate
- Possibility to preset 9 and/or angle values
- Memory 250 values with PC USB link
- Supplied in plastic case

813 B

813 B
Norme:  NF EN ISO 6789 ISO 6789 DIN EN ISO 6789

 

Electronic torque wrenches with ratchet

new!

- Accuracy ±2% of the preset torque value between 20% and 100% wrench capacity
- Measuring mode: peak or follower
- Measuring unit: Nm, lbf.ft, lbf.in and Kg.cm
- To be used with 9x12 or 14x18 mm fittings
- Numbered wrenches supplied with ISO 6789 calibration certificate
- Possibility to preset 9 and/or angle values
- Memory 250 values with PC USB link
- Supplied in plastic case with ratchet

824 A/20

824 A/20
Norme:  NF EN ISO 6789 ISO 6789 DIN EN ISO 6789

 

Torque screwdriver for micromechanics

new!
  • Adjustable torque model for clockwise tightening, for use in combination with bits from the 660 series or, using an adapter, with sockets from the 1/4" manual series
  • Accuracy ± 6% of the preset torque value
  • Readings in Ncm
  • Automatic disengagement on reaching the preset torque value
  • Automatic resetting after 120°
  • Supplied with regulation key and test certificate
824 B1

Production torque screwdrivers with fix torque

new!

- Production torque screwdrivers, ideal when the same tightening values must be repeated
- The desired torque must be pre-set on a control bench
- To be used in conjunction with the 660 series inserts or, with a of connection, to the 1/4" sockets, manual series
- Accuracy ± 6% of the preset torque value
- Automatic reset on reaching the preset torque value
- Automatic reset after 120 °
- Supplied with adjustment key and test certificate

824 B2

824 B2
Norme:  NF EN ISO 6789 ISO 6789 DIN EN ISO 6789

 

Production torque screwdrivers with fix torque

new!

- Production torque screwdrivers, ideal when the same tightening values must be repeated
- The desired torque must be pre-set on a control bench
- To be used in conjunction with the 660 series inserts or, with a of connection, to the 1/4" sockets, manual series
- Accuracy ± 6% of the preset torque value
- Automatic reset on reaching the preset torque value
- Automatic reset after 120 °
- Supplied with adjustment key and test certificate

824 C

 

Ratchet handle for torque screwdrivers

new!

- For quick-action use of torque screwdrivers
- Can be used with torque screwdrivers USAG 824 A and 824 B2

827

827
Norme:  ISO 6789

 

Electronic digital torque controllers

new!

- It allows to check the calibration of clockwise and counterclockwise torque wrenches
- Accuracy ±1%, ±1 digit
- Measuring unit: Nm, lbf.ft, lbf.in and lbf.in
- Measuring mode: peak or follower
- Possible presetting of a limit value and tolerance with orange, green, red LED indicator
- USB link

 
Where to buy our products